Steel Strip Armoring Machine

Primary Application	Outer Steel Strip Armoring of Low-Voltage Power Cables
Available Models	KD630/2 / KD710/2 / KD800/2 / KD900/2 / TXKZ800/50
Steel Strip Width	5–80 mm, Depending on Model
Tension Control	Current-Regulated Magnetic Powder Tension
Maximum Rotation Speed	300–600 rpm, Depending on Model
Center Channel Diameter	100–140 mm, Depending on Model

Machine configuration can be tailored to your cable structure, conductor size, production speed and local power requirements.

MACHINE INFORMATION

Overview & Key Features

Steel Strip Armoring for Low-Voltage Power Cables

The Steel Strip Armoring Machine is designed to apply an outer steel strip armor layer to low-voltage power cables. Multiple models support different strip widths and center channel diameters for varied cable structures.

The machine uses magnetic powder tension with current regulation to maintain stable strip pay-off from a full coil to an empty coil. Independent motor transmission supports controlled operation, while an optional upper-disc loading device can reduce manual handling. A double-head concentric configuration is available for applications requiring larger strip capacity.

Key Features

Current-regulated magnetic powder tension
Stable tension throughout strip unwinding
Independent motor drive system
Optional upper-disc loading device
Double-head concentric configuration available
Active pay-off tension option
Multiple strip width configurations

TECHNICAL REFERENCE

Typical Configuration & Specifications

The following specifications represent a typical machine configuration and are provided for reference. Final parameters will be confirmed according to your cable structure and production requirements.

Machine Type	Steel Strip Armoring Machine
Primary Application	Outer Steel Strip Armoring of Low-Voltage Power Cables
Armoring Material	Steel Strip
Tension Control	Current-Regulated Magnetic Powder Tension
Drive System	Independent Motor Drive
Optional Loading Device	Auxiliary Upper-Disc Loading Device
KD630/2	Maximum Rotation Speed: 400 rpm; Strip Width: 8–40 mm; Center Channel Diameter: 120 mm
KD710/2	Maximum Rotation Speed: 380 rpm; Strip Width: 10–60 mm; Center Channel Diameter: 120 mm
KD800/2	Maximum Rotation Speed: 340 rpm; Strip Width: 15–80 mm; Center Channel Diameter: 140 mm
KD900/2	Maximum Rotation Speed: 300 rpm; Strip Width: 15–80 mm; Center Channel Diameter: 140 mm
TXKZ800/50	Maximum Rotation Speed: 600 rpm; Strip Width: 5–40 mm; Center Channel Diameter: 100 mm
Available Configuration	Double-Head Concentric Armoring with Active Pay-Off Tension

Configuration Note

Final machine parameters and line configuration will be confirmed according to the cable structure, material size, required production speed, reel dimensions and local power supply.

ENGINEERING SUPPORT

Need a Machine Configuration for Your Production Requirements?

Share your cable type, material size, required production speed and reel specifications. Our engineering team will recommend a suitable machine configuration and prepare a practical technical proposal.

Request a Machine Solution